Click image to view full size image
Application
Dimension
Internal graph
Consumption
Attention
1. Confirm whether the product voltage, current, frequency and use category meet the requirements befor use;
2. Connect the control circuit first for no-load operation test and then connect the load in case of no abnormality;
3. Regularly tighten the terminals and remove the deposited dust;
4. Don't make the foreign matters fall into the product
.
Why choose us
AC contactor belongs to modular controlling electrical equipments,which has novelty structure,compact size ,it is DIN-RAIL for installation,size of modular,modeling artistic.use of safey,direct acting inversion.And,it can installde in the distribution boards along with breakers.
Technical data
Power circuit | ||
Voltage Rating(Ue) 1P, 2P |
250VAC |
|
3P, 4P |
400VAC |
|
Endurance(O-C) | ||
Electrical |
100000 cycles |
|
Maximum number of switching operation a day |
100 |
|
Additional characteristics | ||
Insulation voltage(Ui) |
500VAC |
|
Pollution degree |
2 |
|
Rated impulse withstand voltage(Uimp) |
2.5kV(4 kV for 12/24/48V AC) |
|
Degree of protection (IEC 60529) |
Device only |
IP20 |
Device in modular enclosure |
IP40 |
|
Tropicalization (IEC 60068-1) |
Treatment 2(relative humidity 95% at 55ºC) |
|
Dimension
Internal graph
Consumption
| WCT contactors-50Hz | |||||
| Raring(In) | Control voltage(V AC)(50Hz) | Consumption | Max. power |
||
| AC7a | Holding | Inrush | |||
| 4P | 40A | 24 | 4.6 VA | 34 VA | 1.6 W |
| 220...240 | 4.6 VA | 34 VA | 1.6 W | ||
Attention
1. Confirm whether the product voltage, current, frequency and use category meet the requirements befor use;
2. Connect the control circuit first for no-load operation test and then connect the load in case of no abnormality;
3. Regularly tighten the terminals and remove the deposited dust;
4. Don't make the foreign matters fall into the product
.
Why choose us